| HCT-BERT/C |
| HCT-BERT/E1 |
| HCT-BERT/T |
| HCT-SDH/155 |
| HCT-SDH/2.5G |
| ALT3000 |
| ERM-MUX/D |
| ERM-MUX/PLUS |
| ETU-02MUX/PLUS |
| ETU-DXC |
| ETU04 |
| ERM04 |
| SDH155B |
| FIB-E1 |
| FIB-V35 |
| FMUX01A-4/8/16 |
| FMUX01A-01A |
 |
| ETU02-MUX/PLUS E1, a time-division multiplex multiplexer multiplexing the data & voice signals on E1 |
| circuit features multi-service & multi-speed multiplexing function, which can multiplex the signals of |
| 1-12 pieces of N×64K, 19.2K/38.4K/64K/128K synchronous data, ≤38.4K asynchronous data, Ethernet |
| data, voice service, G703/64K and E1 sub-channel to one E circuit. It can be applied for transmitting |
| hi-speed data, videoconference,voice and other signals, and can realize a connection between host |
| computers, host computer and computer, LAN, telephone exchanges, user telephones, images & other devices, and offer a data channel designed for satellite channel or clock-free transparent channels and provide some 9.6K/19.2KBPS transparent channels. The equipment is provided with complete status and alarm indication and supports remote SNMP network management. |
| FEATURES |
.Upper interface provides E1 interface, which is replaceable card-plug mode.
.Two links including master E1 and slave E1 (SubE1) are available. Two E1 upper modules are available, including single E1 & double E1 containing Sub E1, which users can select freely according their demands.
.More than one E1 clock source, internal timing, timing recovery available, timing based on data port (excluding voice port and Ethernet interface), to provide maximum adaptability for E1 and user interface
.Master E1 can be set up as PCM30 or PCM31 framing format, for which users can freely divide the time slot
.Power-down direct connection function of master and slave E1
.Channel speed of N×64kb/s available for users to select, 1984kb/s at max
.Seven replaceable user modules:
N64K-V35 module: provide V.35, RS-530, X21 and RS449 interface criteria
RS232 module: support synchronous/asynchronous mode/independent external clock mode and RS232 interface
G703/64K module: support two ways of G703/64K interfaces
ET100 module: provide 10/100Base-Tx bridge interface
FXS voice module: provide FXS interface
FXO voice module: provide FXO interface
E&M module: provide E&M voice/signaling interface
.Complete E1 line alarm indication and shunting interface connection identification function are available. Front panel is provided with LED indications, including power indication, whole set alarm indication and working status indication of all user ports; and the network management provides detailed information on equipment running status and alarms.
.Users can configure devices easily, and diagnose, test & monitor running status of device. The device features a port menu management on local Console. Remote SNMP network management supports graphic interface.
.With 19” 1U structure, it can be installed on the frame or placed on the table.
.Two links including master E1 and slave E1 (SubE1) are available. Two E1 upper modules are available, including single E1 & double E1 containing Sub E1, which users can select freely according their demands.
.More than one E1 clock source, internal timing, timing recovery available, timing based on data port (excluding voice port and Ethernet interface), to provide maximum adaptability for E1 and user interface
.Master E1 can be set up as PCM30 or PCM31 framing format, for which users can freely divide the time slot
.Power-down direct connection function of master and slave E1
.Channel speed of N×64kb/s available for users to select, 1984kb/s at max
.Seven replaceable user modules:
N64K-V35 module: provide V.35, RS-530, X21 and RS449 interface criteria
RS232 module: support synchronous/asynchronous mode/independent external clock mode and RS232 interface
G703/64K module: support two ways of G703/64K interfaces
ET100 module: provide 10/100Base-Tx bridge interface
FXS voice module: provide FXS interface
FXO voice module: provide FXO interface
E&M module: provide E&M voice/signaling interface
.Complete E1 line alarm indication and shunting interface connection identification function are available. Front panel is provided with LED indications, including power indication, whole set alarm indication and working status indication of all user ports; and the network management provides detailed information on equipment running status and alarms.
.Users can configure devices easily, and diagnose, test & monitor running status of device. The device features a port menu management on local Console. Remote SNMP network management supports graphic interface.
.With 19” 1U structure, it can be installed on the frame or placed on the table.
| EverBright Technologies Co, LTD. |
